Latest company news and operating guidance

The daily maintenance of packaging machinery and equipment must perform several processes. They are the cleaning, tightening, adjustment, lubrication and corrosion protection of equipment. In the daily production process, machine maintenance personnel should strictly carry out maintenance work within the specified time in accordance with the maintenance manual and maintenance procedures of packaging machinery and equipment, reduce the wear speed of parts, eliminate hidden troubles, and expand the scope of services. the life of the machine. Powder packaging machinery and equ ... Read More

The bag-feeding vacuum packaging machine can automatically extract the air in the packaging bag and complete the sealing process after reaching a predetermined vacuum degree. It can also be filled with nitrogen or other mixed gas, and then complete the sealing process. The bag-type vacuum packaging machine is usually used in the food industry, because after vacuum packaging, the food can resist oxidation and can be stored for a long time. The main function of vacuum packaging is to remove oxygen, which helps prevent food spoilage. The principle is also relatively simple, as ... Read More

Due to the increase in the market demand for automatic packaging machinery and equipment, the industry's technological upgrading has been stimulated to a large extent. The new packaging machine with intelligent and automatic functions will gradually replace the traditional and become the mainstream in the future. This is an effective way for packaging machinery enterprises to achieve sustainable development, and it is also the ultimate goal of their technological reform. Automatic packaging machinery and equipment need to be rotated in the process of work. At present, the c ... Read More

1. First, check that the air source pressure is 0.55MPa, within the normal range, check the solenoid valve, rotate the manual knob, the air circuit is normally reversed, the cylinder moves and the stroke is sufficient, the material door can be opened, and the weighing can be performed again automatically, and It is possible to loosen even if the material cannot be automatically cut. Stopping the scale, power transmission, and starting the packer again, it's the same failure. 2. Through observation, it is found that the output indicator light turned on by control #4f7 on the ... Read More

The freeze dryer integrates the refrigeration system, the vacuum system, the heat transfer oil heating system, and the moisture removal system. In the drying process of freeze-dried materials, on the one hand, the vacuum system is evacuated to take away part of the water; , the material is heated and dried by the heating system, and the water contained in the material is brought to the freezer and trap box by vacuuming to freeze, so as to meet the requirements of freeze-drying of the material. In order for the freeze dryer equipment to operate normally for a long time, the ... Read More

What is a fully automatic labeling machine? For manufacturers who are new to water treatment and beverage processing, we found that: 1. For general small water treatment plants, the mineral water sleeve labeling is still manual operation. 2. For this kind of manufacturer, the speed of producing sets of labels is still very slow. All applicable machines replace manual automatic labeling equipment, called: automatic labeling machine The features of the automatic labeling machine are: 1. The production speed is fast, and now the high-speed machine has reached 48000/h. 2. High- ... Read More

1. First check whether the compressor can be started normally, and test whether the voltage of the compressor is normal. 2. If the voltage is normal, check the static resistance. Whether the static resistance voltage is balanced and stable. If the resistors are unbalanced, look for a short circuit in the motor pack. Is there a problem with the winding. If the resistance is stable, check to see if the temperature of the compressor is also stable. If the temperature is too high, it will take a while to cool down. Try again in 2-3 hours. 3. If everything is normal, see if the ... Read More

1. There is an eruption phenomenon when the freeze-dried product is evacuated: this is because the vacuum is evacuated before the product is frozen, and the pre-freezing temperature has not been lower than the eutectic point temperature, or has been lower than the eutectic point temperature, but the time is not enough , the freezing of the product has not been completed. The solution is to lower the pre-freezing temperature and prolong the pre-freezing time. 2. Freeze-dried products have shrinkage and bubbling phenomenon: this is due to partial melting during the sublimatio ... Read More

Precautions for the three processes of the emulsifier. 1. Preparation before use First of all, check whether the vacuum emulsifier and the surrounding working environment have hidden dangers, such as whether the pipelines, equipment appearance, etc. are intact or not, and whether there is water and oil leakage on the ground. Then check the production process and equipment operation and use procedures strictly one by one to ensure that the conditions required by each procedure are met, and they are rigorous and careless. Check the condition of the lubricating oil and coolant ... Read More

Some technical details of vacuum emulsifier Vacuum emulsifier equipment is widely used in food, pharmaceutical, chemical and new materials and other fields. More and more domestic manufacturers have begun to mass produce vacuum emulsification equipment. This commonly used vacuum mixing equipment has good mixing and emulsification effect, low production energy consumption, and good finished product effect, which brings high benefits to the mixing work in the application industry. The equipment is a kind of non-standard equipment with strong technical force and different manu ... Read More