Latest company news and operating guidance
Tablet pressing machine is a combination of electric and manual models. It is a small tablet pressing machine on the market at present. The machine has simple structure and strong working efficiency. It is suitable for pressing powder and granular materials into western medicine tablets, traditional Chinese medicine tablets, disinfection tablets, Koujue tablets, sugar tablets, shaped tablets, milk tablets and other tablets with different shapes. It is applicable to the production and experimental use of pharmaceutical, chemical, college, pharmacy, hospital, health care prod ... Read More
The semi-automatic capsule filling machine is further improved on the basis of the original capsule filling machine at home and abroad. It has high technical content, high performance, and its functions reach the level of *. It is the ideal equipment for the production of capsule drugs in the pharmaceutical industry at present. The performance and characteristics of semi-automatic capsule filling machine are as follows: 1. The whole machine has beautiful appearance, fine process, simple operation and convenient use. 2. The design integrates the filling seat and the metering ... Read More
Before using the automatic capsule filling machine, check whether all parts of the machine and equipment are in good condition, and disinfect and clean the instrument as required. According to the filling amount and other process requirements, select the appropriate material tray specification, powder or particle filling system. 1. The support and the material tray shall be kept in a parallel position, and the filling rod shall be perpendicular to the support to ensure that the filling rod can freely enter and exit the filling hole of the material tray. Loosen the set screw ... Read More
Clean components 1. When the machine works normally for a long time, it is necessary to regularly contact with drugs. When the drug batch is changed or the machine is out of service for a long time, it is also necessary to clean up. Add lubricating oil 2. The transmission mechanism under the worktable of the machine shall be regularly and appropriately added with lubricating oil (grease) to reduce the wear of moving parts. Check oil quantity 3. The oil volume of the main drive reducer shall be checked once a month. If it is insufficient, oil shall be added in time, and the ... Read More
This is how to adjust the equipment of rotary tablet press 1. Preparation before mold equipment: the rotary tablet press is removing the hopper and feeder. Open the right door and roll the handwheel to clean the working surface of the rotary table, the mold hole and the mold of the required equipment. Rotate the pressure to adjust the wheel to * reduce the pressure. Remove the kick down load and unload rails. 2. Medium mold equipment: rotate the middle mold fastening screw on the rotary table about 1 mm from the outer circumference of the rotary table. Be careful not to tou ... Read More
Main products: full-automatic capsule filling machine, full-automatic capsule filling machine, semi-automatic capsule filling machine, capsule machine Clean components 1. When the machine works normally for a long time, it is necessary to regularly contact with drugs. When the drug batch is changed or the machine is out of service for a long time, it is also necessary to clean up. Add lubricating oil 2. The transmission mechanism under the worktable of the machine shall be regularly and appropriately added with lubricating oil (grease) to reduce the wear of moving parts. Ch ... Read More
When an abnormal fault occurs, it may lead to the "timing" error of each cam (that is, the action timing of each cam is wrong). During adjustment, ensure that the motion of each mechanism does not interfere. The motor runs continuously after being decelerated by the reducer, and the filling rotary table produces intermittent movement through the indexing box of the rotary table station. When it is necessary to adjust the "timing" of each cam (that is, the action timing of each cam), the handle shall be used to rotate the main motor shaft. When the filling rotary table reach ... Read More
The capsule filling machine model is a kind of equipment that can fill powder, granules or small pieces into hollow capsules. The product adopts hole plug filling, intermittent operation, variable frequency speed regulation, and is suitable for powder or pellets capsule drugs to automatically complete the work of capsule sowing, capsule separation, filling, capsule locking, finished product output, etc. The production process * complies with GMP specifications. The model and structure of capsule filling machine is composed of empty capsule blanking device, capsule distribut ... Read More
Laminating by tablet press means that two parts are stacked together. Because of adhesion or excessive rolling, the tablets stick to the upper punch. At this time, the particles are filled into the mold hole and repeatedly pressed into lamination or down punching position is too low, and the tablets cannot be driven out. At the same time, the particles are added to the die hole and repeatedly pressed. Pressing the lamination makes the tablet press vulnerable. The problems of pasting and punching should be solved to improve the stamping performance and eliminate the failure ... Read More
Possible problems and solutions of tablet press in tablet preparation 1. Sticking and punching during tablet press operation The surface of the tablet is stuck to a thin layer or a small part by the perforator, resulting in a rough, uneven or concave surface. Usually, it is adhesive. If the edge of the tablet is rough or notched, it can be called adhesive molding. The main reasons for adhesion or adhesion are: the particles are not dry enough or the material is not easy to absorb water, the lubricant is not selected correctly or the amount is insufficient, the surface of th ... Read More