|
Product Details:
|
| Name: | Small Volume Capsule Filling Machine | Model: | SED-NJP-400 |
|---|---|---|---|
| Output: | 48000pc/h | Machine Dimension: | 840*960*1800mm |
| Motor Supply: | 380/220V 50Hz | Motor Power: | Motor5.2KW Vacuum 1.1KW Dust Suction 2.2KW |
| No.of Segment Bores: | 6 | Filling Error: | ±3%-±4% |
| Highlight: | capsule filling device,capsule filling equipment |
||
Small Volume Capsule Filling Machine
Product description of Capsule Filling Machine
It adopts hole plug type filling, batch-type running and frequency control. It is suitable for the whole capsule filling process: capsule feeding, separating, filling(waste capsule rejecting),closing, perfect capsule outputting, for powder and micro pill capsule.
Latest structure: The closed ten position rotating table, high precision, low noise and best suitable for domestic machine-made capsule, and soon the key parts of the bearing and electrical equipment adopts international famous brand, performance stability and can be run at a high speed.
Main Parameter of Capsule Filling Machine
| Model | SED-400J-A |
| Output(pcs/min) | 400 |
| NO of Filling hole | 3 |
| Capsule filling hole | 00#-4# |
| Total Power | 3kw |
| Weight(kg) | 350kg |
| Dimension(mm) | 700×570×1650mm |
Trait of Capsule Filling Machine
1.Good-looking appearance, exquisite workmanship, ease of operation, simplicity of use.
2.Stowage seat and measuring plate are designed as one unit to make measuring plate and stowage rod without deviation, Phenomenon avoid friction Phenomenon between stowage rod and measuring plate, improve its precision highly, furthermore, it prolongs the machine's life greatly.
3.Ineligible capsule can be eliminated automatically(qualified rate not included), the medicine in the capsule can be recycled and be reused thus it can increase greatly heconimic efficiency.
4.Simplicity and convenience of dismantling, installation and clean, various models of mould can be replaced each other, the mould of 80 model and 1000model as well as 1200 model can be replace mutually on the same machine to meet different requirement of capacity.
5.Dust collector and vacuum pipe as well as waste air Pipe are installed in the inner of the machine to avoid the air pipe becoming hard, bard broken and leakage etc phenomenon, it is mo re convenient to clean the platform. Furthermore, it accords with the requirement of GMP that medicine can not contact with organic material.
6.The cap of stowage rod is made of stainless steel which replaces original plastic cap to void breaking Phenomenon; the screws and caps on the platform lesser to make the whole appearance more good-looking.
Application of Capsule Filling Machine
Contact Person: Wei
Tel: 86-15372434551
Fax: 86-571-88615836
